When it comes to the maintenance of smart locks, I believe everyone can say one or two points: the panel and the identification head should be cleaned regularly, the handles should not be suspended, and the battery should be replaced in time... but you know that the
Lock Body of the smart lock is also in need of maintenance. Well?
Some friends will say that the lock body is a part hidden inside the lock. Should it not require special maintenance? That may not be the case, there is a lot of learning here! Below, I will summarize some tips on lock body maintenance for you.
1. When closing the door, it is best to hold the handle, screw the lock tongue into the lock body, and then release the door after closing the door. Do not force the door, otherwise it will reduce the service life of the lock.
2. Check the matching clearance between the lock body and the lock plate. The fit between the lock tongue and the lock plate hole is appropriate. The clearance between the door and the door frame is 1.5mm-2.5mm. If changes are found, adjust the position of the hinge or lock plate on the door. At the same time, pay attention to the shrinkage and thermal expansion caused by the weather (wet spring, dry in winter) to ensure the clearance between the door and the door frame, the lock body and the lock plate is reasonable, so as to ensure the smooth use of the lock.
3. When the main locking tongue or the safety lock tongue protrudes out of the door, do not hit it hard to avoid damage to the locking tongue and door frame.
4. Because the sealing strip installed between the door body and the door frame has a spring force, when the locking is tight, the door can be pushed or pulled at the same time as the door is opened to overcome the elastic force. Do not turn the handle strongly to avoid damage to the handle. .
5, before going out or going to sleep, don't think that someone at home will do everything, not lock the
Door Lock, thief theft will not see if there is anyone in your family. Be sure to lock the security door so that you can play the true role of smart locks and protect our property and life.
6. Always keep the lock body transmission parts with lubricant to keep the transmission smooth and prolong the service life. It is recommended to check once every six months or one year, and check if the fastening screws are loose to ensure the fastening.
7, the lock core should not rain, flush, because there is a small spring inside will rust failure is not flexible.
8. When the user uses the spare key of the smart lock, the newly changed
Lock cylinder may not be smoothly inserted after the 2-3 months of use. Many consumers think that there is a problem with the quality of the
Lock Cylinder. Actually, this is a normal phenomenon. When the problem is first discovered, some graphite powder (pencil powder) can be added to the keyhole for lubrication. Do not add any oil as a lubricant to prevent the grease from sticking to the marble spring, causing the lock to not rotate.
February 18, 2023
